Page 60 - Softbound_Edition_19_en

47
47

MXS35/16x53_M222b Solenoids Solenoids
Solenoid

Solenoid coil N.S35 /19 x 50
1 2 3 4 5 6 7 8 9 10 11 12 13 14
to VDE 0580
Protection class IP65 / IP67 46.3
47
47 Execution: M X S35/19 x 50-… M222
Plug alignment Electric wiring 63 35
A 46.3 • 2 pole 20 1.5 A
47 47
35 MBS35/16x50_DC • DC-version available up to 28 VDC
• Screw clamp plastic DB 1.1-171
MDS35/16x53 • Plug housing plastic, transparent, DESCRIPTION MDE35/16x40 FUNCTION
MXS35/16x53_M222a MXS35/16x53_M222b removable The slip-on solenoid coil N.S35/19 x 53 is available with different types In combination with the corresponding armature tube the function of an
40
• Printed circuit board protected with conformal of electric connections. The AC voltage type incorporates a rectifier. on-off solenoid or proportional solenoid will be obtained.
coating The available AC voltages are listed in the type code section. The
53 construction corresponds to standard VDE 0580. The steel housing is
• Protection type IP40 with plastic hood installed zinc-/nickel-coated as standard.
1 2 3 1.5 4 5 6 1 7 8 9 10 11 12 16 13 14
47.3 M222a M222b
B 47 2 46.3 B
16.1 green green
20 35
63 TYPE CODE 46.3
47
A 46.3 M222c M222d 1 20 1.5 35 N S35 / 19 x 50 - A - #
35 MBS35/16x50_DC Metal housing, square 32
DB 1.1-171
2
MDS35/16x53 48.7 MXS35/16x53_M222a 47 Connection execution DB 1.1-174 3
green
red
MDE35/16x40
MXS35/16x53_M209b Connector socket EN175301-803 / ISO 4400 D Flying leads L (only DC)
MDS35/19x50
40
Connector socket AMP Junior-Timer J (only DC) Cable K
-1 Connector Deutsch DT04-2P G (only DC) Bayonet connector VG 95234
53 B
MJS35/16x53 53 M222e M222f MXS35/16x53_M222b I I max = 1,0 A at 130 °C Screw clamp 50 X (only DC)
= 1,5 A at 120 °C
C +2 green I max = 2,0 A at 110 °C Coil execution 16 C
1.5 47.3 * Not recommended for max
proportional solenoids
Internal coil diameter 19 mm
47.3 Coil length 50 mm
B B
16.1 19.03
20 Voltage Direct current G Alternating current R
46.3
PARTS LIST Nominal voltage 12 VDC 12 115 VAC 115
24 VDC 24 35 230 VAC 230

51.5 47 Standard 32 3
Description
47
48.7 Position Article MXS35/16x53_M209a MXS35/16x53_M209b M222b/d/f M222a/c/e Special cable execution M28 46.3
DB 1.1-174
With pressure compensation M35 (only DC) 35

MDS35/19x50
10 219.2802 Mating connector (M209 und M222) Special screw clamp M209 (only DC)
D 32 D
MXS35/16x53_M222b
20 088.1116 Plastic hood (only M222) Screw clamp and electric wiring M222 (only DC) 3
MXS35/16x53_M222a
MJS35/16x53 Design-Index (Subject to change) 50 53
C MKS35/16x53 67.2 C
DB 1.1-175
47.3 NDS35/19x50 53
NOTE! SPECIFICATIONS 19.03 50
Technical explanation see data sheet 1.1-400/410/430
Valve side Coil winding min. H (180 °C) 3.2 12 VDC 24 VDC 115 VAC 230 VAC
insulation class Nominal power (W) 26 26 26 26
Protection class depending on the connector version (Switching function)
19.03
51.5 MGS35/16x53 MXS35/16x53_M209a
Limiting power
E 47 IP65 or IP67 according to EN 60 529 (Proportional function) (W) 16 16 – – E
46.3
23.1
DUTY FACTOR / TEMPERATURE TEMPERATURE / VOLTAGE 47.3 (if correctly mounted) Limiting current (50 °C) (A) 1,36 0,68 – –
Relative duty factor 100 % DF / 5 min 35 (Proportional function)

32
D when mounted on armature tube and valve Nominal resistance (Ω) 5,6 22 D 410 1650
K4237 130 Ambient temperature See temperature curve on page 4
MXS35/16x53_M222a 3 3 Number of windings (–) 718 1 400 6100 11 850
67.2 120 Nominal voltage range 10 – 250 VDC Weight of solenoid coil (kg) 0,32 0,32 0,32 0,32
MKS35/16x53 MXS35/16x53_M209b 110 24 – 250 VAC
MLS35/16x53 100 100 Corrosion protection Salt spray test in accordance with
46.3 1 2 3 DB 1.1-175 EN ISO 9227 > = 1000 hours
90 1 90 NDS35/19x50 50 53
Duty factor in % 60 60 Voltage in % 2 Duty factor at 110 % nominal voltage Caution: To avoid overheating the coil may only be energised conditions (heat emission surface, air circulation, etc.), these
80
80
The effective heat emissions depends on the installation
F 70 4 2 70 1 Duty factor at nominal voltage SAFE OPERATION 3.2 NOTE! F
when mounted on an armature tube and valve.
4 Min. voltage in % for proportional limiting
40
40
E 50 MLS35/16x53-M47 MGS35/16x53 50 3 Max. voltage in % for 100 % duty factor 19.03 influence the described area of application. E
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 current at 100 % duty factor 23.1
47.3
63 Ambient temperature in °C 47.3
MXS35/16x53_M209b MXS35/16x53_M209a
MLS35/16x53 MKS35/16x53-M28_DC 46.3 Wandfluh AG Tel. +41 33 672 72 72 E-mail: [email protected] Illustrations not obligatory Data sheet no. Wandfluh AG Tel. +41 33 672 72 72 E-mail: [email protected] Illustrations not obligatory Data sheet no.
G Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-174E 4/4 Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-175E 1/4 G
CH-3714 Frutigen Edition 19 45 CH-3714 Frutigen Edition 20 11
Page 60
F F
MDS35/16x53-M35
MLS35/16x53-M47
68.2
47.3
63
74.3
H H
MXS35/16x53_M209a MGS35/16x53
MKS35/16x53-M28_DC
MKS35/16x53-M28_AC
G G
MDS35/16x53-M35
68.2
I 74.3 46.3
74.3
H H
MGS35/16x53
MKS35/16x53-M28_AC MLS35/16x53-M47
MBS35/16x50_AC
Gezeichnet 18.07.2014 BEH
J
01 06.09.2018 BEH Ansichten von DB 1.1-171, 174 und 175 hinzugefügt Geprüft 14.09.2018 RL
02 12.09.2018 IND MBS35/16x50_AC/DC korrigiert Freigegeben 14.09.2018 TK
Rev. Datum Name Änderungsnr. Änderungsbeschrieb M 1:1 Serie freigegeben Modellreferenz: Doknr. 0156363 / Konfiguration 015
Gewicht
Magnetspule komplett Ersetzt durch: 0.271 kg
Ersatz für:
I 74.3 Dok.-Nr. Format
46.3 M.S35/16x53 0156424 A0
Dokument darf ohne schriftliche Einwilligung weder kopiert, Art.-Nr. Revision
verwertet noch an Dritte weitergegeben werden. DB 1.1-170 02
Zuwiderhandlung ist strafbar und wird gerichtlich verfolgt.
1 2 3 4 5 6 7 8 9 10 11 C:\00_wandfluh\verkauf\dokumentation\reg1.1\db 1.1-170\0156424 Blatt 1 von 1
MLS35/16x53-M47
MBS35/16x50_AC
Gezeichnet 18.07.2014 BEH
J
01 06.09.2018 BEH Ansichten von DB 1.1-171, 174 und 175 hinzugefügt Geprüft 14.09.2018 RL
02 12.09.2018 IND MBS35/16x50_AC/DC korrigiert Freigegeben 14.09.2018 TK
Rev. Datum Name Änderungsnr. Änderungsbeschrieb M 1:1 Serie freigegeben Modellreferenz: Doknr. 0156363 / Konfiguration 015
Magnetspule komplett Ersetzt durch: 0.271 kg
Gewicht
Ersatz für:
M.S35/16x53 Dok.-Nr. 0156424 Format
A0
Dokument darf ohne schriftliche Einwilligung weder kopiert, Art.-Nr. Revision
verwertet noch an Dritte weitergegeben werden. DB 1.1-170 02
Zuwiderhandlung ist strafbar und wird gerichtlich verfolgt.
1 2 3 4 5 6 7 8 9 10 11 C:\00_wandfluh\verkauf\dokumentation\reg1.1\db 1.1-170\0156424 Blatt 1 von 1