Page 702 - Softbound_Edition_19_en

Overview
Electronics
Overview electronics Overview electronics

Programming tools

TM
Interfaces CAN 2 x CAN / USB CAN 3 x CAN CAN Interfaces CAN Interfaces CAN / USB 2 x CAN / USB Orchestra TM Project management software article no. 740.1000 contains:
For developing software by means of intuitive «Ladder-Logic» programming. Simple definition of a
Composer
complete system from inputs and outputs to CAN messaging with minimal programming knowledge.
Orchestra
Presto
project definition tool for C / C ++ application programming, with the 3 party tool CodeWar-
rd
TM
TM

rior™ for the C-code compilation. The respectively required NXP (Freescale) Suite «CW-SUITE-STAN-
DARD: CodeWarrior® Development Suite-Standard» (contains «HCS12 (X) Edition» version 5.1 and
«Microcontrollers Edition» version 10.6) is not contained in Orchestra™.
Sensor supply 5V - / 5V 5V Display LED 20 Sensor supply 5V 5V Arranger TM The graphic display can be programmed with pre-prepared graphical elements simply with Drag & Drop.
It must be ordered directly from NXP.
The program variables can be assigned to these elements in order to make the desired inputs and out-

PME products can be easily networked to each other. This results in a control system that can be adapted exactly to the needs of the application.
puts via the display.
Digital 8 8 4 33 16 Digital 4 Digital 4 4 Conductor TM Diagnostic and set-up tool. Real-time view of system inputs, outputs and variables. Conductor is part
of Orchestra , but it is also available as an autonomous software with separate license dongle.
TM
Article no. 740.1001
Solenoid current measurement 4 0 0 4 0 Solenoid current measurement 0 Outputs PWM Total 4 4 4 4 USB-to-CAN-adapter The adapter is needed for downloading software on PME modules, which do not have a USB interface.
Additional tools
Not contained in Orchestra .
TM
PCAN-USB from Peak-Systems or from Gridconnect.
Development tool for C-code debugging using JTAG interface.
C-Code Debugging
Not contained in Orchestra . Must be ordered via P & E Microcomputer systems.
TM
PWM 8 8 4 33 16 PWM 4 Video
An overview of the PME programme can be found in the brochure «PME – the smart hydraulic solution».
Outputs Total 8 8 4 33 16 Outputs Total 4 Freq. 0 4 4 4

Freq. 0 / 2 2 4 / 2 4 1 Freq. 0 Digital 10 10

Digital 0 / 2 16 8 / 6 65 17 Digital 2 Analog 4 5

Analog 3 16 4 / 2 14 5 Analog 1 Inputs Total 10 10

Inputs Total 3 / 5 16 8 / 6 69 17 The number of usable inputs and outputs depends on the variant. Details can be found in the data sheet. Inputs Total 2 Resolution 480 x 242 800 x 480
PME (Programmable Mobile Electronics)

Data sheet number 1.13-270 1.13-275 1.13-280 1.13-285 1.13-290 Data sheet number 1.13-300 Data sheet number 1.13-310 1.13-320

Digital mobile electronics Display Size 4.3" 109 mm 7" 178 mm

Type CL-307 CL-446 CL-449 CL-450 CL-451 Type Keypad CL-609 Type Display CL-709 CL-711

Wandfluh AG Tel. +41 33 672 72 72 E-mail: [email protected] Illustrations not obligatory Data sheet no. Wandfluh AG Tel. +41 33 672 72 72 E-mail: [email protected] Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.13-05E 2/3 Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.13-05E 3/3
CH-3714 Frutigen Edition 21 16 CH-3714 Frutigen Edition 21 16
Page 702