Page 420 - Softbound_Edition_19_en

Proportional spool valve
Proportional spool valve Proportional spool valve

COMMISSIONING ACCESSORIES Proportional spool valve with integrated
For DSV amplifiers as a rule no parameter adjustments by the cusot- Parameterisation software See start-up electronics NG6
mer are required. The plugs have to be connected in accordance with Flange construction ISO 4401-03
the chapter «Electrical connection». Parameterisation cable for interface Article no. 219.2896
USB ◆ direct operated
(from plug type A on Mini B, 3 m) ◆ Q = 40 l/min
Controllers are supplied configured as amplifiers. The adjustment of Q max = 32 l/min
the mode of control and of the controller are carried out by the custo- Mating connector (plug female) for analog interface ◆ p = 350 bar
N max
mer by means of the software adjustment (USB interface, Mini B). straight, soldering contact M23, 12 Article no. 219.2330 ◆ max
Further information can be found on: «www.wandfluh.com». pole
Free- of charge download of the «PASO» software and the operation angled, soldering contact M23, 12 Article no. 219.2331 DESCRIPTION APPLICATION
instructions for «DSV» hydraulic valves as well as the operation inst- pole Direct operated proportional spool valve with 4 connections in Proportional spool valves are perfectly suitable for demanding
ructions CANopen Protocol resp. Profibus DP Protocol, with Device straight, soldering contact, 7 pole Article no. 219.2335 5-chamber system with integrated electronics. The Plug & Play tasks due to the high resolution, large volume flow and low hystere-
Profile DSP-408 for «DSV». valves are factory set and adjusted and have therefore a high sis. The applications are in the industry as well as in the mobile
valve-to-valve reproducibility. With protection class IP67 for the hydraulics for the smooth control of hydraulic actuators. Some
Threaded subplates Data sheet 2.9-10 electronics, these valves are suitable for harsh environmental examples: control of the rotor blades of wind generators, forestry
Note! The mating connectors and the parameterisation cable conditions. Proportional to the electronically transmitted and earth moving machines, machine tools and paper production
are not part of the delivery. Refer to chapter «Accesso- Multi-station subplates Data sheet 2.9-50

ries». Module type manifold blocks Data sheet 2.9-90 command value, the spool stroke, the spool opening and the valve machines, simple position controls, robotics and fan control.
volume flow increase. The control takes place via an analogue
Technical explanations Data sheet 1.0-100 Note! „PASO” is a Windows programm in the flow diagram
interface or a fieldbus interface (CANopen, J1939 or Profibus DP).
Filtration Data sheet 1.0-50 The parameterisation takes place by means of the free of cost para - style, which enables the intuitive adjustment and storing
Relative duty factor Data sheet 1.1-430 meterisation and diagnostics software «PASO» or via fieldbus of all variable parameters. The data remain saved in
case of a power failure and can also be reproduced and
SEALING MATERIAL interface. The USB parameterisation interface is accessible transferred to other DSV.
NBR or FKM (Viton) as standard, choice in the type code Note! Auxiliary conditions for the cable: through a screw plug. As an option, these valves are available with
– External diameter 12 pol: 3,5…14,7 mm integrated controller. As feedback value generators sensors with
– External diameter 7 pol: 8…10 mm
– Wire cross section max. 1 mm 2 voltage or current output can be connected directly. The available
– Recommended wire cross section: controller structures are optimised for applications with hydraulic
0…25 m = 0,75 mm (AWG18) actuations.
2
2
25…50 m = 1 mm (AWG17)
SYMBOL
SURFACE TREATMENT STANDARDS Symmetrical control
◆ The valve body is painted with a two component paint CANopen DRP 303-1 ACB-S AC1-S CB2-S
◆ The slip-on coil and the armature tube are zinc nickel coated Profibus DP IEC 947-5-2 A B A B A B
◆ The electronics housing / chassis is made of aluminium
Mounting interface Wandfluh standard a 0 b a b
Protection class EN 60 529 a b a b
Contamination ISO 4406 P T P T P T
efficiency Meter-in control
ADB-V AD1-V DB2-V
A B A B A B
INSTALLATION NOTES MANUAL OVERRIDE 0
Mounting type Flange mounting ◆ Integrated (–) Actuation pin integrated in the armature tube. a a b b a a b b
3 fixing holes for Actuation by pressing the pin P T P T P T
socket head screws M5 x 40 ◆ Push-button (HF1) Integrated in the knurled nut. Actuation by
Mounting position Any, preferably horizontal pressing the push-button
Tightening torque Fixing screws M = 5,2 Nm (screw ◆ Spindle (HS1) Integrated in the knurled nut. Actuation by turning ELECTRICAL SPECIFICATIONS ACTUATION
the spindle (continuously variable valve actuation)
D
quality 8.8, zinc coated)
M = 5 Nm knurled nut Attention! The actuation of the manual override is possible up to a Protection class IP67 with suitable mating connector and Actuation Proportional solenoid, wet pin push
D
tank pressure of: closed housing cover type, pressure tight
Note! The length of the fixing screw depends on the base 160 bar Integrated (–) Ramps Adjustable Connection Via device receptacle
material of the connection element. 160 bar Push-button (HF1) Parameterisation Via fieldbus or USB
160 bar Spindle (HS1)
Supply voltage 12 VDC, 24 VDC
Note! Exact electrical specifications and detailed description
of «DSV» electronics can be found on data sheet
1.13-76.

Wandfluh AG Postfach CH-3714 Frutigen
Tel. +41 33 672 72 72 Fax +41 33 672 72 12 [email protected]

www.wandfluh.com Illustrations are not binding Data subject to change 6/6 Edition: 19 30 1.10-3240 E www.wandfluh.com Illustrations are not binding Data subject to change 1/6 Edition: 19 29 1.10-3340 E
Page 420